Categories: Statistical Tools for Attorneys Survey Research Methods Planning and Designing a Survey TASA ID: 1660 On Thursday, July 12, 2012, at 2 p.m. ET, The TASA Group, Inc., in conjunction with consulting statistician Dr. Jack B. ReVelle, presented a free, one-hour, interactive webinar, Survey Research Methods: Planning and Designing a Survey, for all legal professionals.Survey Research Methods is the third installment of the three-part webinar series, Statistical Tools for Attorneys in Litigation. Part 1, “Introduction to Data,” and Part 2, “The Basic Tools,’ were presented on March 4 and May 8, respectively.Part 3, “Survey Research Methods,” is composed of four phases: “Planning and Designing a Survey,” “Developing Survey Instruments,” “Collecting and Processing Data,” and “Interpreting and Reporting Results.” During this program, Planning and Designing a Survey, the presenter covered the first three (of 12) critically important steps:Initiating a SurveyPlanning a ProjectConstructing Questionnaires About the ExpertJack B. ReVelle, Ph.D., is a consulting statistician with a Ph.D. in Industrial Engineering and Management from Oklahoma State University. Dr. ReVelle provides his technical assistance in both quality and industrial engineering to attorneys involved in litigation. Previous Article Bus Passenger Safety Next Article Top 10 Expert Report Writing Mistakes - How to Avoid Them and Write Bulletproof Reports Print Tasa ID1660